OpenConstruction Academy
Sign in / Register
EN

Theory before task 2 · 6 min

Topsoil strip from the plan: PDF takeoff with a depth

Topsoil off the plan

After this lecture you can

  1. Calibrate a plan before measuring on it.
  2. Find the stripping limit on an earthworks plan.
  3. Turn a traced area into a volume with the Volume tool.
1 / 3

The footprint, not the road

Topsoil holds roots and organic matter; left under an embankment it rots and settles, and in a cut it ends up in the fill. So it comes off the whole footprint of the earthworks: from the toe of each embankment slope or the top of each cut slope, plus a working margin. The plan draws that line as the stripping limit.

Example. A 10 m road on a 2 m embankment with 1:2 slopes needs a strip about 10 + 2 × 4 + 2 × 1 = 20 m wide.
SAR10SAR8
  • Road width SAR10
  • Slopes SAR8
  • Margin SAR2
2 / 3

Area with a depth

In PDF Takeoff the Volume tool takes a closed shape and a depth. Calibrate first, on the longest dimension, then click the corners of the limit in order and close the shape; the tool asks for the depth in metres and keeps area × depth as one measurement in its group.

Example. A 120 × 20 m strip at 0.15 m: 2,400 m2 × 0.15 = 360 m3.
Area inside the limit, m22,400.00 m²
Depth, m0.15 m
Volume, m3360.00 m²
Common mistake

Depth in millimetres

The drawing says 150 mm; the depth box takes metres. Typed as 150, the volume comes out a thousand times too big, and nothing on the sheet looks wrong until the bill does.

Example. Type 0.15.

Strip of another section

Different numbers from your task.

Not to scale
The problem
  • Section 200.0 m m long; strip 20.0 m m wide at the start, 26.0 m m at the end; depth 0.15 m.
Step 1 of 2

Area

Area inside the limit, m2?

(20.0 m + 26.0 m) ÷ 2 × 200.0 m = 4,600.00 m².

Step 2 of 2

Volume

Topsoil, m3?

4,600.00 m² × 0.15 = 690.00 m².

In short. Area inside the stripping limit × depth, in place.

Check yourself

Question 1 of 2

The plan gives a strip depth of 200 mm. What goes in the depth box?

  • Right: metres.

  • That is millimetres: a thousand times too much.

  • Centimetres.

Question 2 of 2

Why calibrate on the long dimension?

  • Right.

  • They can; they are less exact.

  • Any known length works; longer is better.

Read the source

Free official texts. The lecture cites clause numbers and puts the rules in its own words.