OpenConstruction Academy
সাইন ইন / নিবন্ধন
BN

কোর্সের পরিচিতি · 3 মি

মাটির কাজ: কাট ও ফিল আয়তন, মাস হল ও দর নির্ধারণ (কানাডা)

Marlow Heights Phase 1 · Two new subdivision streets, Ontario · কাল্পনিক প্রকল্প

You are the estimator for the earthworks contractor on two new streets in Ontario. Earthworks means digging soil out where the road is too high (cut) and building it up where it is too low (fill). In five tasks you measure cut and fill, convert soil between its loose and packed states, read a mass haul diagram, build a hauling rate from machine cycles and price a change for poor ground.

কাজ 1 শুরু করুন

Work
Cut, fill, borrow (soil brought in) and haul for two streets
Contract
Municipal unit-price contract, items in the OPSS style (Ontario standard specifications)
Story
Tender in October 2026 to a change in June 2027
ERP-তে কাজ
5টি কাজ, প্রায় 3 ঘ 15 মি

কে কাকে কী দেয়

Every arrow is a document that reaches your desk or leaves it, and the task where that happens.

আপনার কাছে আসে

  • The Town's engineerIssues sections, checks quantities
    • Cross-sections of Heron Driveকাজ 1
    • Mass ordinates of Marlow Avenueকাজ 3
    • Order: silt out, Granular B inকাজ 5
  • Site superintendentRuns the machines and trucks
    • Excavator, trucks and cycle timesকাজ 4
আপনিEstimator, earthworks contractor

আপনার কাছ থেকে যায়

    • Cut and fill quantitiesকাজ 1
    • Borrow and waste quantitiesকাজ 2
    • Overhaul and surplusকাজ 3
    • Rate for haul to wasteকাজ 4
    • Change for unsuitable siltকাজ 5
    The TownOwner, pays by the unit

প্রকল্পে আপনার পথ

Three tasks to get the quantities right, one to price a line that has no rate, one to price a change once the ground is open. Start with task 1: in the Bill of Quantities you work out cut and fill from ten cross-sections.

  1. Quantities

    কাজ 1 · 35 মি

    average end area পদ্ধতিতে Cut and fill

    আপনার ফল
    Cut and fill volumes, items 02.01 and 02.02
    নথি
    Ten cross-sections of Heron Drive
    ERP-তে
    Bill of Quantities
  2. Quantities

    কাজ 2 · 35 মি

    সোয়েল, শ্রিংকেজ এবং ট্রাক লোড

    আপনার ফল
    Borrow to bring in, and truck loads to take away
    নথি
    Soil factors and the engineer's note on wet clay
    ERP-তে
    Bill of Quantities
  3. Quantities

    কাজ 3 · 40 মি

    Mass haul, free haul এবং overhaul

    আপনার ফল
    Overhaul (hauling beyond the free distance) and surplus, items 03.01 and 03.02
    নথি
    Mass ordinates of Marlow Avenue
    ERP-তে
    Bill of Quantities
  4. Rate

    কাজ 4 · 45 মি

    সরঞ্জামের উৎপাদনশীলতা থেকে ইউনিট রেট

    আপনার ফল
    The unit rate for haul to waste
    নথি
    Machine costs, fuel and cycle times
    ERP-তে
    Bill of Quantities
  5. Change

    কাজ 5 · 40 মি

    অনুপযোগী উপাদান: মূল্যে পরিবর্তন

    আপনার ফল
    The priced change for unsuitable silt
    নথি
    Test pit sections and agreed rates
    ERP-তে
    Variations

How a cross-section becomes a price

Each column is the bill after one task. Grey is what it already holds; blue is what that task adds.

Cut and fill
কাজ 1Measured volumesThe areas at each end of a slice times its length give cut and fill, each in its own unit and item.
Borrow and wasteCut and fill
কাজ 2Borrow and wasteCut and fill compared in one state of the soil. What is short is imported, what is unusable leaves by truck.
Overhaul and surplusBorrow and wasteCut and fill
কাজ 3HaulDistance beyond the free haul is paid as overhaul. What is left at the end is surplus.
Haul to waste, pricedOverhaul and surplusBorrow and wasteCut and fill
কাজ 4A rate built upMachine output, hourly cost and the dump's gate fee give a price per bank m³ (soil as it lies in the ground).
Change for siltThe priced bill
কাজ 5A changeUnsuitable silt out, granular fill in, at agreed rates and without HST (sales tax).

নীল হলো কাজটি যা যোগ করে; ধূসর আগের ধাপ থেকে আসা।

সংক্ষেপে. Measure in bank m³. Convert only to compare or to haul. The slower machine sets the output. Price a change at the agreed rates, HST outside.