Курсқа кіріспе · 3 мин
Концепт кезеңіндегі элементтік шығындарды жоспарлау (Ұлыбритания, RICS NRM 1)
You are the cost consultant for the client, an NHS Trust, building a new health centre in England. At the start there are only sketches, but the client must know what the building will cost before it commits. In five tasks you turn the concept design into a cost limit, test a cheaper frame and outer walls, and report the result against the client's budget.
Ойдан шығарылған жоба- Building
- Three storeys, atrium and an enclosed roof plant room
- Rules
- RICS NRM 1, the UK rules for early cost estimates and cost plans
- Story
- Concept design, November 2026 to January 2027
- ERP-дегі жұмыс
- Тапсырмалар: 5, шамамен 3 сағ 20 мин
Кім кімге не береді
Nothing is built yet. Everything that passes between you and the others is a drawing, a figure or a letter.
Сізге келеді
ArchitectLeads the design team- Concept drawings1-тапсырма
- Option B: steel frame, rendered walls4-тапсырма
- Budget letterFrom the Trust's board
- Total project budget, VAT in5-тапсырма
СізCost consultant, working for the clientСізден кетеді
- Order of cost estimate1-тапсырма
- Cost plan 1 and the cost limit3-тапсырма
- Saving from option B4-тапсырма
- Cost plan 2 against the budget5-тапсырма
The health trustClient, sets the budget
Жоба мен адамдар ойдан шығарылған. Портреттер генерацияланған.
Жоба бойынша жолыңыз
One task from a single rate, two to build the first cost plan, two to change it and report. Start with task 1: in the Bill of Quantities you measure the floor area (GIFA) and multiply it by a rate from similar buildings.
Order of cost
1-тапсырма · 40 мин
GIFA және шамамен алынған құн бағасы
- Нәтиже
- Floor area (GIFA, measured inside the outer walls) and the first estimate
- Құжат
- Concept drawings, a benchmark rate and price indices
- ERP-де
- Bill of Quantities
Cost plan 1
2-тапсырма · 50 мин
Элементтік шығындар жоспары
- Нәтиже
- Elements 1 to 8 (frame, roof, walls and so on) and the cost check per m²
- Құжат
- Element unit quantities and rates
- ERP-де
- Bill of Quantities, Cost Breakdown
Cost plan 1
3-тапсырма · 40 мин
Құрылыс жұмыстарынан шығын лимитіне дейін
- Нәтиже
- The cost limit at the tender date
- Құжат
- Allowances and the inflation forecast
- ERP-де
- Bill of Quantities, Markups
Cost plan 2
4-тапсырма · 40 мин
Құнды оңтайландыру: болат қаңқа және сылақталған қабырғалар
- Нәтиже
- The saving from option B, after the redesign fee
- Құжат
- Option B rates from the design team
- ERP-де
- Bill of Quantities
Cost plan 2
5-тапсырма · 30 мин
2-шығындар жоспарын бюджетпен салыстыру
- Нәтиже
- The variance to budget and the cost per m²
- Құжат
- The Trust's budget letter
- ERP-де
- Bill of Quantities, Cost Breakdown
How a floor area becomes a cost limit
Each column is one task. The grey part is carried from the task before, the coloured part is what that task adds.
Көкпен — тапсырма қосатын бөлік; сұрмен — алдыңғы қадамнан келгені.
Қысқаша. Measure GIFA inside the walls. Price each element on its own measure. Add the percentage rows in NRM 1 order, each once. Compare like with like.